⚡ Ford Lightning Forum ⚡ banner

SSM 50994: Sync 4A Screen Goes Blank

1004 Views 4 Replies 2 Participants Last post by  ChasingCoral
1 - 2 of 5 Posts
My 15” display failed to startup yesterday morning. Black screen, as if it lost power. But.. it showed the camera images when I shifted into reverse, and the truck was 100% drivable. I did two things, not sure which helped. I ended up shutting the truck down, locking the doors, pushing the button on the charge port several times (in case I messed something up when I disconnected the charger) and walking the keys away from the truck for about 1/2 hour to make sure it went asleep. Bottom line, it booted back up just fine, no problems since.
  • Like
Reactions: 1
Did you try rebooting the Sync 4A screen?
That would have been my Plan A if I know how to do it! I found some instructions for other vehicles, that didn’t seem to apply to the lightning with 15” display. How is it done?
1 - 2 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.