when all else fails, reboot...
12v battery reboot
12v battery reboot
Screens went black!
I had my windows tinted in my lightning today, front 2 to match the back and the front glass with 70% ceramic tint. Apparently sometime during or after the tint was finished the instrument cluster screen and the 15 inch screen went black. The truck was still able to be drove to the dealership which is what the tinting company did. This was at the end of the day so nothing has been discovered yet but I have some ideas as to what is going on. Anyone have this issue or something like this happen in the Mach E? The truck was left in accessory mode for the duration of the tinting application. I would say 2-3 hours at least.
1 - 2 of 32 Posts
or just remove the POSITIVE terminal lead, wait 30 secs, reattach
(it's also a good time to put a volt meter on the leads to see the status of the battery)
(it's also a good time to put a volt meter on the leads to see the status of the battery)
1 - 2 of 32 Posts
- This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
⚡ Ford Lightning Forum ⚡
LightningOwners.com - Ford F-150 Lightning Forum, Community And Owner’s Club. Join the conversation about the Electric F-150.
Full Forum Listing
Recommended Communities
