⚡ Ford Lightning Forum ⚡ banner

Output power quality/ voltage stability?

575 Views 2 Replies 2 Participants Last post by  StanT
Does anyone know what the power output voltage stability is like?
we had a constant voltage Sola transformer fail which we use to drive a current calibration loop for one of our ammeter products.
I may try tomorrow to see if the inverter output is stable this might do until we find a replacement transformer.
I need up to 10 Amps at 120V, we have an isolation transformer downstream and a variance, then our step up transformer after that to create a field for our ammeter, we monitor the actual current in the test line with a toroidal transformer to a meter So we can check our instrument against that.
the key is a stable source at the front of the line.
1 - 2 of 3 Posts
follow up - the 120v output was very stable and worked well for my testing
  • Like
Reactions: 3
1 - 2 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.