I've been using the CSP as our primary charger since end of June. Other than the initial connection to FordPass issues, no real problems. However, the last two times I've disconnected the CCS from the truck, the CSP LEDs go to solid white (which is station reset).
If charges fine, shuts off when target charge is reached, etc. and stays linked to FordPass. It does go back to a solid blue ready to charge status in approx 60 secs and works fine when plugged back in. I'm a little concerned as firmware issues on EVSEs are not uncommon (my Grizzl-E has been back twice for updates).
I wanted to see if anyone else as had this start to happen. Or if it might actually be from an OTA update (although not sure why you'd want a reset).
If charges fine, shuts off when target charge is reached, etc. and stays linked to FordPass. It does go back to a solid blue ready to charge status in approx 60 secs and works fine when plugged back in. I'm a little concerned as firmware issues on EVSEs are not uncommon (my Grizzl-E has been back twice for updates).
I wanted to see if anyone else as had this start to happen. Or if it might actually be from an OTA update (although not sure why you'd want a reset).
