[jimfigler]

This information may be on here and some of you on other forums may have seen it. But the wired door keypad can be added to the Pro. You need to buy the wired keypad and the trim by the window with the cut-out. The brave person can try to cut the trim themselves. There is a template I've seen on YouTube videos.
Before I bought the trim myself I wanted to verify the connection existed in the door. So yesterday I removed the door panel. The connection is there. I temporarily hooked up the keypad. I locked the truck with lock button on the door. I entered the code and the driver door unlocked.

There are 2 changes that need to be done on Forscan. The changes can be done manually in the "as built" or use the menu page for easier changes.
BCM 726-31-01 xxxx xx01 xx--
APIM 7D0-01-02 xxxx x2xx xx--
Or just go in those two modules and look for keypad and "enable" both.

Keypad part number FL3Z-14A626-AF $21
Door Trim w/cutout FL3Z-1520555-TB $81

 

[Thunder415]

thank you for sharing! The ford parts are less than i expected

 

[jimfigler]

thank you for sharing! The ford parts are less than i expected

You're welcome. I may do a video or at least take a series of photos detailing the project

 

[chris.s]

Thanks for sharing!

Any recommendations on which adapter to buy for folks who haven't used forscan before? Do cheaper versions from Amazon work well enough or would you recommend buying OBDlink ex?

 

[jimfigler]

Thanks for sharing!

Any recommendations on which adapter to buy for folks who haven't used forscan before? Do cheaper versions from Amazon work well enough or would you recommend buying OBDlink ex?

This is what I bought. Was recommended on Forscan web site. Works fine

https://a.co/d/2xlEfUJ

 

[jimfigler]

The door trim with cutout arrived yesterday and I did the install. It took me less than an hour but I was already familiar with removing the door panel and window trim.

Pretty straight forward, the feeding of the wire down the edge of the door took the longest. I used a dowel to push it down between the edge of the door and window guide. The main thing is making sure to keep it away from the window movement, which isnt too hard. The picture shows the capped off connector for the keypad